ADDSiL™ 9330 — Silicone Elastomer Powder

Product Overview

ADDSiL™ 9330 is designed to modify the appearance and tactile properties of coatings, inks and elastomers. The supplied TDS describes a soft, velvety and silky-smooth feel, a matting effect, dispersibility and compatibility with multiple formulation systems.

Key Features

• Provides a soft, velvety or powdery tactile finish.
• Supports matting and surface texture modification.
• Readily dispersible in suitable formulation systems.
• The TDS reports heat- and aging-resistance characteristics without numerical test conditions.

Physical Properties

Selected values from the original TDS. Refer to that document for conditions and whether values are typical or specification limits.

Typical Applications

• Coatings requiring a soft-touch, reduced-gloss surface.
• Printing inks and elastomer formulations requiring tactile or surface appearance modification.

Technical Considerations

For liquid formulations, slowly disperse the powder into an oil phase under gentle agitation to limit dusting and obtain a uniform dispersion or gel, then incorporate or dilute as required. For powder formulations, blend or grind with the other powder components and ensure uniform mixing. The TDS does not specify a fixed dosage; determine the optimum level by laboratory trials.

The source lists the reported physical values as typical rather than specifications. Store tightly closed at room temperature in a cool, ventilated place, avoiding prolonged extreme heat or cold. The stated unopened shelf life is 24 months. Consult the current SDS before handling. The supplied TDS describes industrial coatings, inks and elastomer uses; no personal-care or skin-contact suitability is inferred.

Related Technical Articles