AppliedProduct Overview
SiSiB® CS0310 is designed to improve the wetting and spreading of water-based formulations. The TDS reports a surface tension of approximately 22 mN/m at 0.1 wt% in water and describes suitability for formulations within a pH range of 3–10.
Key Features
- Strong reduction of aqueous surface tension.
- Promotes wetting, spreading and uniform surface coverage.
- May assist penetration into difficult-to-wet areas.
- Can enhance sheeting and water drainage.
- Nonionic silicone surfactant.
Physical Properties
| Property | Reported value |
|---|---|
| Appearance | Clear liquid |
| Color | Colorless to light amber |
| Surface tension (0.1 wt%) | 22 mN/m |
| Viscosity (25°C) | 20–50 cSt |
| Cloud point (1 wt%) | Max. 10°C |
Selected values from the original TDS. Refer to that document for conditions and whether values are typical or specification limits.
Typical Applications
- Tub and tile cleaners and toilet bowl cleaners.
- Oven cleaners, rust removers and drain cleaners.
- Stain removers and disinfectant formulations.
Technical Considerations
The TDS does not specify a universal addition level. Evaluate several levels in the final formulation. Confirm compatibility, storage stability, wetting, spreading, foaming and final surface appearance before commercial use.
The surfactant function does not by itself establish the disinfecting efficacy of a finished cleaning product.
Technical Documentation
- Download Original TDS (PDF · 116 KB) ↓
SiSiB® CS0310 — Original TDS (English)
Open PDF in a new tab ↗
September 2026 · Version 8.1 · English original · Unmodified
Official Product Website
Official product information and commercial inquiries are managed by the publishing brand.
SiSiB SILICONES ↗