Transparent soft silicone adhesive gel coated onto a plain flexible film web.

Product Overview

After a 1:1 A/B mix and cure, the TDS describes a soft transparent gel with surface tack and conformability. Adhesive-construction performance also depends on carrier, coating thickness and curing conditions.

Key Features

  • Soft transparent gel with good surface tack.
  • Two-component addition-cure system with a 1:1 mixing ratio.

Physical Properties

PropertyReported value
Mixing ratio, A:B1:1
Pot life (25°C)More than 90 min

Selected values from the original TDS. Refer to that document for conditions and whether values are typical or specification limits.

Typical Applications

  • Coating a soft silicone adhesive layer onto a flexible dressing carrier film.

Technical Considerations

Mix A and B at the TDS 1:1 ratio and optimize coating, degassing and cure for the selected carrier. Reported peel results are tied to the specified TDS test construction and cannot establish finished-device performance, biocompatibility, clinical efficacy or regulatory approval. Values are typical, not specifications; consult the original TDS and current SDS.

Technical Documentation

SiSiB® SSA510 original TDS first-page preview

Official Product Website

Official product information and commercial inquiries are managed by the publishing brand.

SiSiB ↗

Sources

  1. SiSiB® SSA510 — Original TDS (English) ↗

← Materials & Innovations