Plain translucent skin-contact adhesive film gently lifted from intact forearm skin.

Product Overview

The TDS describes a soft adhesive layer with good tack and relatively low peel force. Its reported peel value applies to the stated 20 μm PU carrier and about 100 μm cured adhesive thickness under the specified cure.

Key Features

  • Low-peel profile for gentle skin-contact constructions.
  • Two-component addition-cure system with a 1:1 mixing ratio.

Physical Properties

PropertyReported value
Viscosity, A/B6,000–8,000 mPa·s
180° peel on stainless steel (TDS conditions)0.1–0.3 N/25 mm

Selected values from the original TDS. Refer to that document for conditions and whether values are typical or specification limits.

Typical Applications

  • Flexible skin-contact adhesive film with a relatively low-peel silicone adhesive layer.

Technical Considerations

Mix A and B at the TDS 1:1 ratio and optimize coating, degassing and cure for the selected carrier. Reported peel results are tied to the specified TDS test construction and cannot establish finished-device performance, biocompatibility, clinical efficacy or regulatory approval. Values are typical, not specifications; consult the original TDS and current SDS.

Technical Documentation

SiSiB® SSA610 original TDS first-page preview

Official Product Website

Official product information and commercial inquiries are managed by the publishing brand.

SiSiB ↗

Sources

  1. SiSiB® SSA610 — Original TDS (English) ↗

← Materials & Innovations