Narrow translucent adhesive tapes being die-cut on an unmarked release liner.

Product Overview

The TDS reports a moderate peel-strength range under a specified PU-film coating and curing test. Carrier compatibility and actual construction must be evaluated before commercial use.

Key Features

  • Soft conformable adhesive layer with moderate peel strength.
  • Two-component addition-cure system with a 1:1 mixing ratio.

Physical Properties

PropertyReported value
Viscosity, A/B8,000–12,000 mPa·s
180° peel on stainless steel (TDS conditions)0.5–0.7 N/25 mm

Selected values from the original TDS. Refer to that document for conditions and whether values are typical or specification limits.

Typical Applications

  • Die-cutting flexible silicone skin-contact adhesive tapes on a release liner.

Technical Considerations

Mix A and B at the TDS 1:1 ratio and optimize coating, degassing and cure for the selected carrier. Reported peel results are tied to the specified TDS test construction and cannot establish finished-device performance, biocompatibility, clinical efficacy or regulatory approval. Values are typical, not specifications; consult the original TDS and current SDS.

Technical Documentation

SiSiB® SSA613 original TDS first-page preview

Official Product Website

Official product information and commercial inquiries are managed by the publishing brand.

SiSiB ↗

Sources

  1. SiSiB® SSA613 — Original TDS (English) ↗

← Materials & Innovations