Unbranded flexible skin-contact patch adhered to intact adult forearm skin.

Product Overview

The TDS describes good initial tack and a moderate peel-strength range under a specific PU-film test construction. It also reports no residue after removal in the stated intended use.

Key Features

  • Skin-contact construction with initial tack and flexible film compatibility.
  • Two-component addition-cure system with a 1:1 mixing ratio.

Physical Properties

PropertyReported value
Viscosity, A/B1,500–2,500 mPa·s
180° peel on stainless steel (TDS conditions)1.2–1.8 N/25 mm

Selected values from the original TDS. Refer to that document for conditions and whether values are typical or specification limits.

Typical Applications

  • Flexible skin-contact adhesive patch for wearable-device construction.

Technical Considerations

Mix A and B at the TDS 1:1 ratio and optimize coating, degassing and cure for the selected carrier. Reported peel results are tied to the specified TDS test construction and cannot establish finished-device performance, biocompatibility, clinical efficacy or regulatory approval. Values are typical, not specifications; consult the original TDS and current SDS.

Technical Documentation

SiSiB® SSA615 original TDS first-page preview

Official Product Website

Official product information and commercial inquiries are managed by the publishing brand.

SiSiB ↗

Sources

  1. SiSiB® SSA615 — Original TDS (English) ↗

← Materials & Innovations